MOBIWIRE NOKOSI 3G 2.4"

MOBIWIRE NOKOSI 3G 2.4"

Background:........
A relative purchased this excellent small mobile phone but as someone not into technology and of advancing years found the instruction book to be not at all easy to understand or logical to follow. As I had suggested the purchase of this phone I felt it was up to me to try to help, and so produced the following notes which I hope will prove to be of use to others.
Frank Foster June 2019
franksfoster@gmail.com







MOBIWIRE NOKOSI 3G 2.4”

UNDERSTANDABLE INSTRUCTIONS FOR PHONING AND TEXTING

General
If the phone is OFF give a long press on red key (But I suggest you leave it always on)
If the phone is ON a short press on the red key will normally bring up the home screen
If the screen goes off, a short press on the red key will normally bring it back.
If the red key will not get you back to the home screen keep pressing the white arrow.

To add a New Contact
1.Highlight the blue “People” symbol  using the outer ring (Selection Key).
2.Press the ... key (the “Settings” screen comes up).
3 Press green arrow key until “Add to contacts” comes up in a list.
4. Scroll down until the green background is in place behind “Add to Contacts””
5. Press the centre button (Validation Key) and “Create New Contact” comes up with green background.
6. Press centre button and “USIM” and “Phone Contact” comes up (the USIM usually has the green background. (If it has not use outer ring to place it there).
7. Press centre button
8. The “USIM contact” screen comes up.
9. Type in the name and numbers, scroll down and green highlight the “Done”
10. Press centre button and a contact saved message will show.
11. Press the white arrow until you return to the home screen.

To MAKE a phone call
1. The phone must be on with the screen showing
2. Use the outer ring (selection key) to select the green background symbol on bottom row
3. Press 0 on the key pad (this brings up all numbers because they all start with 0)
4. Scroll down to the number you want using the up/down outer ring (Selction Key)
5. When it has a green background press the centre button and the call will go through.
6. To end the call press the red arrow.
7. Press white arrow to return to home screen.

To RECEIVE a phone call
1. The phone must be on but it doesn’t have to have the screen showing.
2. Press green arrow
3. To end the call press red arrow.

MESSAGING (TEXTS)
1. Assuming that the phone is left switched on and the home screen is visible, use the outer ring (Selection Key – the one with with directional arrows) to highlight the “Messaging” symbol.
2. Press the centre button (The Validation Key) and a list of texts will appear.
3. To read either a new text or one previously received, highlight the one you want to read in green and then press the centre button. (To return to the home screen click the white arrow button till it appears.)
4. To send a new text repeat stages 1 and 2 above.
5. Press the ... key (three white dots) this will bring up a list which includes “New Message” which needs to have a green background.
6. Press the centre button.
7. At the top of the screen that comes up, type in the first few letter of the name of the person you wish to text. A list of matching contacts names will come up.
8. Use the outer ring to highlight in green the person you wish to text.
9. Type your text at the bottom then use the outer ring to highlight the arrowhead on the right then press the centre button to send the text.
10. To return to the home screen keep pressing the white arrow till you get there.

NB
1. VOLUME If the phone volume is low or is completely off, open the home screen and keep pressing the up part of the outer ring until a large green pointer appears at the top of the screen then press centre button then use the outer ring to increase or decrease the volume. (I would just keep pressing the right side of the outer ring to make it the maximum volume) Then press the centre button to confirm and use the white arrow key to get back the the home screen.


Comments